To bend aluminium for the enclosure, I built a simple basic machine make with plywood and some metallic rigidifiers. With the tube installed, the round corner is 10mm radius, which is exactly what is need for the transmitter enclosure. The thickness of the alu should be less or equal than 1mm. Some pictures below:
24 janvier 2010
18 janvier 2010
13 janvier 2010
09 janvier 2010
Here is the ouptut of an Assan X8R6 receiver channel. The delay between pulse is 20msec, which is nice for most servos, and the max voltage is 3.4v. That may be unsufficient in some cases for old servos or regulator. Click on the picture for bigger image.